 |
Copper- Nickel-Alloys
Alloy
Chemical composition
Physical properties
Mechanical properties
Dimensions and Tolerances
Product Form 
|
 |
Copper-Nickel-Alloys
5. Dimensions and Tolerances
Thickness Tolerances
| Thickness |
inch |
0.004-0.008 |
>0.008-0.016 |
>0.016-0.020 |
>0.020-0.031 |
>0.031-0.047 |
>0.047-0.071 |
>0.071-0.098 |
>0.098-0.118 |
| mm |
0,1-0,2 |
>0,2-0,4 |
>0,4-0,5 |
>0,5-0,8 |
>0,8-1,2 |
>1,2-1,8 |
>1,8-2,5 |
>2,5-3,0 |
Width 300
|
inch |
+/-0.0008 |
+/-0.0012 |
+/-0.0016 |
+/-0.0020 |
+/-0.0024 |
+/-0.0031 |
+/-0.0035 |
+/-0.0039 |
| mm |
+/-0,02 |
+/-0,03 |
+/-0,04 |
+/-0,05 |
+/-0,06 |
+/-0,08 |
+/-0,09 |
+/-0,1 |
Other dimensions and tolerances on request
Width Tolerances
| Width |
Thickness |
Thickness |
Thickness |
Thickness |
| inch |
mm |
inch
0.004-0.008
|
mm
0.10-1.00
|
inch
> 0.039-0.079
|
mm
> 1.00-2.00
|
inch
> 0.079-0.098
|
mm
> 2.00-2.50
|
inch
>0.098-0.118
|
mm
>2,50-3,00
|
| ≤1.97 |
≤50 |
+/-0.004 |
+/-0,10 |
+/-0.006 |
+/-0,15 |
+/-0.010 |
+/-0.25 |
+/-0.020 |
+/-0.50 |
| >1.97-3.94 |
>50-100 |
+/-0.006 |
+/-0,15 |
+/-0.008 |
+/-0,20 |
+/-0.012 |
+/-0.30 |
+/-0.022 |
+/-0.55 |
| >3.94-7.87 |
>100-200 |
+/-0.008 |
+/-0,20 |
+/-0.010 |
+/-0,25 |
+/-0.014 |
+/-0.35 |
+/-0.024 |
+/-0.60 |
| >7.87-11.80 |
>200-300 |
+/-0.012 |
+/-0,30 |
+/-0.020 |
+/-0,50 |
+/-0.024 |
+/-0.60 |
+/-0.030 |
+/-0.75 |
Other dimensions and tolerances on request
Length Tolerances (cut strip)
| Thickness |
Length |
| inch |
mm |
inch 20 - 118 |
mm 500 - 3000 |
| 0.016 - 0.079 |
0.40 - 2.00 |
+ 0.40/ -0 |
+ 10/ -0 |
Other forms on request
|
 |
Home